Green Hill Graphics
Green Hill Graphics
  • 26
  • 348 606
Dutch Springs Quarry Scuba Diving September 19, 2021
Just a quick video from a dive we did a couple weeks ago at Dutch Springs. Figured I'd get a few dives in before they shut down for good.
Don't forget to Like and Subscribe if you enjoyed and would like to see more!
Green Hill Graphics, LLC
Birdsboro, PA
www.DecalsNStickers.com
GreenHillGraphicsLLC
Переглядів: 379

Відео

How to Make a Carpenter Bee Trap | 5-Minute DIY Project
Переглядів 4,6 тис.4 роки тому
Hey guys thanks for watching. You can make a carpenter bee trap in about 5 minutes. Start out with a standard 4x4 post and cut a piece to about 7 inches. Then drill a hole in the center of the bottom that’s a little less than 1” wide. Next, you’ll need to drill a 3/8” hole on each side about an inch and a half from the bottom. These holes need to be drilled at a 45-degree angle and connect to t...
How to Make a Wooden Toy Airplane - DIY Wood Toy Project | Free Plans
Переглядів 1,5 тис.4 роки тому
30 years ago in middle school shop class, we made wooden toy airplanes. It's been sitting around my house and shop since. It moved around with me everywhere I did. I was about 13-14 I'm guessing so my woodworking skills were not great. But I don't think I did too bad for my first project. Well, I saw it sitting on my shelf and figured I'd try making it one more time. I didn't record it, but I m...
How to Make a Bird House from Pallet Wood - DIY Pallet Wood Birdhouse
Переглядів 38 тис.4 роки тому
I figured I'd make a few birdhouses for our flying friends since the weather is starting to turn and nesting season is upon us. It's very simple, just break down the pallet, clean up the boards and start making! I got the dimensions required and hole size for chickadees and titmouse birds. If you're designing your own and have a different type of bird in mind, check out - www.birdwatching-bliss...
Building a Wood Laptop Table / Stand / Desk Quick DIY Project
Переглядів 112 тис.4 роки тому
Building a Wood Laptop Table / Stand / Desk Quick DIY Project I felt like a bad infomercial every time I used my laptop on my lap so I had to do something about it. A quick trip to the hardware store and a few bucks later I had the small requirement of parts. I grabbed a piece of pine 16" x 48" to use as the top. I then used red oak for the legs. I just figured it'd be a nice contrast and I thi...
The MOST USELESS BOX in the WORLD!! (Custom Box by Wood by Wright) Useless Box DIY Kit Conversion
Переглядів 3,1 тис.4 роки тому
The MOST USELESS BOX in the World. Most boxes are made and used for a good reason, but not this one. It's utterly and completely useless. It started with a Useless Box DIY Kit - amzn.to/2l44ycV Then James from Wood by Wright made the custom wood box (beautiful by the way James!). The boring plastic box just wasn't going to cut it. Head over to Wood by Wright and check out how he made the box be...
Zip Lining at Skytop Lodge Adventure Course GoPro Session Footage
Переглядів 5105 років тому
Don't forget to Like and Subscribe if you enjoyed and would like to see more! Green Hill Graphics, LLC King of Prussia, PA www.DecalsNStickers.com GreenHillGraphicsLLC
How To Make a Custom T-Shirt Using a Roland Plotter, Heat Press and Siser EasyWeed Vinyl
Переглядів 2725 років тому
How To Make a Custom T-Shirt Using a heat press, a Plotter and Siser Easy Weed Vinyl. Single t-shirt for The Lukens Foundation. www.thelukensfoundation.org
How to Make Dutch Oven Sourdough Bread Recipe with 4 ingredients
Переглядів 5 тис.5 років тому
Dutch Oven Sourdough Bread Recipe 4 Ingredients This is a simple, no-knead sourdough bread recipe using only flour, water, salt, and sourdough starter. The video is a slight variation from the recipe on our site. halfbakedcook.com/dutch-oven-sourdough-bread-with-starter/ Ingredients 200 grams Whole Wheat Flour 300 grams Bread Flour 350 grams Water room temperature 80-100 grams Sourdough Starter...
Making a Small Leather Moleskine Notebook Cover
Переглядів 4436 років тому
Making a Small Leather Moleskin Notebook Cover Based off the template from Ian Atkinson - www.etsy.com/listing/194594274/build-along-leather-pattern-3-moleskine It's been a while since I posted. We moved this time last year and the new house doesn't have the garage space I had before. I'm slowly working on getting a "shop" together. This is my first real leather project. I made a couple belts b...
Install DJI Phantom Rotor Stickers Decals
Переглядів 6027 років тому
Just a quick instructional installation video for the rotor stickers on the DJI Phantom 3. Buy a set of REFLECTIVE rotor decal replacements here - cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=182566360053&ssPageName=STRK:MESE:IT Don't forget to Like and Subscribe if you enjoyed and would like to see more! Green Hill Graphics, LLC King of Prussia, PA www.DecalsNStickers.com GreenHill...
Making Colored Pencils from Scraps
Переглядів 20 тис.8 років тому
Making a set of colored Pencils - ua-cam.com/video/rLEU6XeWcGU/v-deo.html My mother recently started painting again so I wanted a gift she could use to show off her artistic side. These were all scrap pieces I cut to rough size. I sanded 1 side flat on each piece and put a v groove in. From there I could lay the colored lead into the groove and glue both sides back together. After the glue drie...
Making a Simple Box-Joint Box using Jig
Переглядів 20 тис.8 років тому
I wanted to test a few things with this video, so it's a really simple project. First, I rigged up an articulating lamp for use with my camera and I put spots all over the shop to just pick it up and place it. This will eliminate any shaking caused by the tools. So I was testing the different angles I could shoot from. There are a few shots missing, like the box glue up. I'm a dope and had the ...
Making a Wood Vase with Wooden Gypsy Flowers
Переглядів 1,1 тис.8 років тому
I know it's a little early for Mother's Day, but I wanted to get it done now. This is my entry for: Shane’s Hobby Shop Mothers Day Contest 2016 ua-cam.com/users/shaneshobbyshop I took some Padauk and Cherry and ripped them down to 1/2" x 13/16" strips and glued them up. After the glue was dry I cleaned them up and ran them through the planer. Then using the table saw I ripped 45 degree angles o...
Making a Plywood Bandsaw Box
Переглядів 10 тис.8 років тому
Making a Plywood Bandsaw Box
Woodturning a Mallet on the Lathe
Переглядів 4,2 тис.8 років тому
Woodturning a Mallet on the Lathe
Making a Wood Toy Car for Kids
Переглядів 47 тис.8 років тому
Making a Wood Toy Car for Kids
Making a Wood Business Card Holder
Переглядів 10 тис.8 років тому
Making a Wood Business Card Holder
Wood Turning a Billy Club, Nightstick, or Police Baton
Переглядів 21 тис.8 років тому
Wood Turning a Billy Club, Nightstick, or Police Baton
Making a Bar Top Napkin and Straw Holder / Caddy
Переглядів 2,1 тис.8 років тому
Making a Bar Top Napkin and Straw Holder / Caddy
Making a Cherry and Walnut Wood Clipboard
Переглядів 6 тис.8 років тому
Making a Cherry and Walnut Wood Clipboard
How To Make DIY Origami Seed Pots with Newspaper
Переглядів 25 тис.9 років тому
How To Make DIY Origami Seed Pots with Newspaper
How to Heat Press a T-Shirt from Start to Finish!
Переглядів 12 тис.9 років тому
How to Heat Press a T-Shirt from Start to Finish!
High Speed Install of Police / Sheriff Car Graphics
Переглядів 2,8 тис.9 років тому
High Speed Install of Police / Sheriff Car Graphics
Vinyl Decal Application Instructions How to Install Stickers
Переглядів 1,5 тис.9 років тому
Vinyl Decal Application Instructions How to Install Stickers

КОМЕНТАРІ

  • @Ruweisat
    @Ruweisat Місяць тому

    Excellent job! What is the wood?

  • @NoFlyZone11
    @NoFlyZone11 2 місяці тому

    Do you have plans/instructions with measurements available?

  • @NoFlyZone11
    @NoFlyZone11 2 місяці тому

    What angle do you cut the legs?

  • @jaydenoneal-op9nl
    @jaydenoneal-op9nl 3 місяці тому

    I don’t have one of those 😂

  • @garethalford682
    @garethalford682 4 місяці тому

    The Night Night Stick Bonk 💥😴

  • @craigwyjack7453
    @craigwyjack7453 9 місяців тому

    Great job! Very creative and well thought out! Super... (but I didn't like the music)

  • @garypostell5268
    @garypostell5268 11 місяців тому

    👎 on music !

  • @murraygraham1696
    @murraygraham1696 Рік тому

    nice build

  • @ORANGBETAWIBEKASI
    @ORANGBETAWIBEKASI Рік тому

    Super sekali

  • @valkyriesardo278
    @valkyriesardo278 Рік тому

    CAUTION....On the front panel where you drill the round "bird hole", make certain the inside surface is very rough. Do not sand that surface smooth. The young and even the adult birds need a rough surface for their claws to climb up to the hole. If they cannot get to the exit, they will be trapped inside and die.

    • @cm-ek4ci
      @cm-ek4ci 11 місяців тому

      A little scrap of window screen works well

  • @daddycavefish
    @daddycavefish Рік тому

    What do you charge for clubs

  • @smalltownhomestead66
    @smalltownhomestead66 Рік тому

    Do you still have template for this?

  • @virtualoutburst6873
    @virtualoutburst6873 Рік тому

    Not only an incredible build, but a very relaxing, enjoyable video. Great job!

  • @lalahaha99012
    @lalahaha99012 Рік тому

    Is that maple

  • @SilentButDescriptive
    @SilentButDescriptive Рік тому

    It's a bit too fat.

  • @firenbubble
    @firenbubble Рік тому

    why bee ?

  • @katandpapa
    @katandpapa Рік тому

    Awesome! I'm an old guy that's gone through stage 4 Cancer and stage 3 kidney disease and I've never been the same. Making a lap table like this is exactly what I need for when I'm reading and writing! Thank you ! 🇺🇸🙏❤

  • @jasminedre2339
    @jasminedre2339 Рік тому

    WHAT MEDIA TYPE DO YOU USE ON VERSA WORK

  • @AntonioRamirez-bt7sz
    @AntonioRamirez-bt7sz Рік тому

    Muy bien, gran trabajo, aparentemente fácil pero no es tan sencillo, me puede decir el grosor de la lámina que pone entre el cuerpo del auto y las ruedas por favor? Apenas estoy aprendiendo y no logro que giren bien, como que se atoran y no camina bien. No se si sea por falta de lijarlas para que queden suaves y lisas, gracias mil por la respuesta.

    • @greenhillgraphics
      @greenhillgraphics Рік тому

      Thanks! It was just a scrap piece that was between 1/8” and 1/4” thick. You just want a little space between the body and wheel so that it spins freely.

  • @jarmstrong2843
    @jarmstrong2843 2 роки тому

    Nice bird houses from pallet wood. Great idea to recycle the wood. Like the music too. Who are the music artists and their album name?

  • @garybennett3823
    @garybennett3823 2 роки тому

    quality and entertaining video well done

  • @northerntranquility1614
    @northerntranquility1614 2 роки тому

    Ausome birdhouse inspired me to make one myself ,enjoyed the video Thanks Dale

  • @CaneFu
    @CaneFu 2 роки тому

    This is still the best nonlethal self-defense item ever dreamed up by man.

    • @Zeskofp
      @Zeskofp Рік тому

      simple, cheap, and lasts for ages with practically no maintenance, and doesn't malfunction.

    • @CaneFu
      @CaneFu Рік тому

      @@Zeskofp I have had several of these billy clubs stashed around my house for more than 30 years and they all still look like brand new with zero maintenance; no doubt they will outlast me.

  • @ttc3004
    @ttc3004 2 роки тому

    What band is this or what musician

    • @Cheshire-Coatings
      @Cheshire-Coatings Рік тому

      It's Mama Zula - Running from My Doom ua-cam.com/video/QT0HRZhTxnw/v-deo.html

  • @adkinsmikkelsen4980
    @adkinsmikkelsen4980 2 роки тому

    Make it wooden with the help of the WoodPrix plans instructions.

  • @crusucker
    @crusucker 2 роки тому

    Thing of beauty

  • @laplumedescaron142
    @laplumedescaron142 2 роки тому

    Vous mettez un titre box joint jig mais vous ne montrez pas votre système , alors je ne vois pas à quoi sert votre vidéo !!!!

  • @vinceroncace8428
    @vinceroncace8428 2 роки тому

    Told you it's the Olympic down there

  • @garyhennessey3621
    @garyhennessey3621 2 роки тому

    Bluebird houses are easier than that with clean out flex door

  • @craftstrial6381
    @craftstrial6381 2 роки тому

    Origami pot plant (aloe vera) ua-cam.com/video/sEcZBuFEdDI/v-deo.html

  • @loremipsum6804
    @loremipsum6804 2 роки тому

    👍😀👍

  • @johnmeeks9618
    @johnmeeks9618 2 роки тому

    You need to add some explanation as to what and why you are doing each step in the making of the Bandsaw Box.

  • @JulioPlasencia
    @JulioPlasencia 2 роки тому

    Hello there, the template link no longer works.

  • @hammondmiers3789
    @hammondmiers3789 2 роки тому

    Stodoys Blueprints has some very useful blueprints with all the details you need.

  • @jaromejacksan6934
    @jaromejacksan6934 3 роки тому

    I did it myself thanks to Woodglut.

  • @Vitaliisuh
    @Vitaliisuh 3 роки тому

    Not enough height for bed or sofa usage ☝️

  • @rachel-qd8kw
    @rachel-qd8kw 3 роки тому

    Dear , Thank you for taking your time to read this message. We are an authorized distributor of JADPES. We’d like to invite you to test our new released bamboo lap desk. Products information is as below, pls kindly check the pic of attaching a file: 1) Not only can the lap table be used as a lap desk with a stand, but it can also be used as a dining table for children or the disabled. 2) With a 4-angle tilting top, the laptop table provides the most comfortable viewing experience and makes your neck and back free from unnecessary. 3) Our side drawer of portable laptop desk can help you achieve organization, pens, flash drives, USB, or others. 4) Use 100% natural bamboo and make laptop bed trays with our exquisite craftsmanship. Would you like to test our bamboo lap desk and shoot a video? If you have an interest, please kindly reply to us. Email: 18219112830@163.com Please kindly be assured that this product is completely free for you to use. If you have any questions or doubts, please do not hesitate to contact us. Looking forward to your reply. Thank you again for your reading. Have a nice day! Customer Service Team

    • @rachel-qd8kw
      @rachel-qd8kw 3 роки тому

      Dear , Thank you for taking your time to read this message. We are an authorized distributor of JADPES. We’d like to invite you to test our new released bamboo lap desk. Products information is as below, pls kindly check the pic of attaching a file: 1) Not only can the lap table be used as a lap desk with a stand, but it can also be used as a dining table for children or the disabled. 2) With a 4-angle tilting top, the laptop table provides the most comfortable viewing experience and makes your neck and back free from unnecessary. 3) Our side drawer of portable laptop desk can help you achieve organization, pens, flash drives, USB, or others. 4) Use 100% natural bamboo and make laptop bed trays with our exquisite craftsmanship. Would you like to test our bamboo lap desk and shoot a video? If you have an interest, please kindly reply to us. Email: 18219112830@163.com Please kindly be assured that this product is completely free for you to use. If you have any questions or doubts, please do not hesitate to contact us. Looking forward to your reply. Thank you again for your reading. Have a nice day! Customer Service Team

  • @doylemetzinger1774
    @doylemetzinger1774 3 роки тому

    Try the best carpenters and woodworkers plans. Woodprix.

  • @gavinbolton4660
    @gavinbolton4660 3 роки тому

    Great job!

  • @rosh7049
    @rosh7049 3 роки тому

    What is the total weight of the table?

  • @sun6v546
    @sun6v546 3 роки тому

    Feeeeeeeeeeeeeeeeeeeeeeeeeeeeennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnttttttttttttttttttttttttttttaaaaaaaaaaaassssssssssssssstttttttttttttttttttttttiiiiiiiiiiiiiiiiiccccccccccccccccccccccccccccccccccccccccc 99% , can you make with a wooden screws , Or wooden studds ( am not sure if this is the right term in Carpentary ) hope you got my question ........ Thank you. :)

  • @alik9695
    @alik9695 3 роки тому

    👍

  • @royjolley3886
    @royjolley3886 3 роки тому

    Can you send the mesurements of each segment of this bird house?

  • @nannettebattista6224
    @nannettebattista6224 3 роки тому

    Nice, nice, very nice. However, you can make it better. Just google Woodprix and learn how to do it easily.

  • @carriepenningbush2031
    @carriepenningbush2031 3 роки тому

    This is great! Thanks so much!

    • @greenhillgraphics
      @greenhillgraphics 3 роки тому

      You're very welcome! Glad it helped, happy planting!

  • @aizhemmangao2826
    @aizhemmangao2826 3 роки тому

    much better if you include the measurements....

    • @greenhillgraphics
      @greenhillgraphics 3 роки тому

      Here is what I used - Tabletop - 13" x 21" x .75" Fame for the legs - (2) 19" x 1.5" x .75" and (2) 10.5" x 1.5" x .75" Legs - (4) 8" x 1.5" x .75". **If I were to do it again I would make the legs slightly longer. The brace that goes between the legs - 9" x 1.5" x .75"

  • @cathrynsteeles4079
    @cathrynsteeles4079 3 роки тому

    when you put them in the ground is the newspaper biodegradable

    • @greenhillgraphics
      @greenhillgraphics 3 роки тому

      It is. I use newspaper in my compost bin all the time.

    • @cathrynsteeles4079
      @cathrynsteeles4079 3 роки тому

      @@greenhillgraphics huh i have one more idea if thats unsuccessful i will ask for a link to the size and also i love your idea with it

    • @cathrynsteeles4079
      @cathrynsteeles4079 3 роки тому

      @@greenhillgraphics yeah are you in Australia if you aren't if you are you must have different sized newspaper

  • @SATSifaction
    @SATSifaction 3 роки тому

    This is a cool build. Is there a reason you used epoxy over wood glue? Otherwise looks amazing

    • @greenhillgraphics
      @greenhillgraphics 3 роки тому

      Thanks! Honestly it’s just pure laziness. I ran out of wood glue and didn’t feel like going out. Had epoxy on hand so I used that. 😉

  • @VenConmigo_go
    @VenConmigo_go 3 роки тому

    Hello! I really need something like this but different size like 25x20 can you build it for me. How much it cost?

  • @megazabir9071
    @megazabir9071 3 роки тому

    love the vibe 😍